logo comp4

Different Table With Unique Characteristics

This equipment is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined surface in the lateral water flow with obvious zone of the minerals with different specific gravities, high quality of concentrates produced, convenient operation and adjustment and other features.The spiral concentrator surface is constructed of ore sand or slime and is made up of glass fiber reinforced plastic or aluminum alloy.They are effective gravity separation equipment which can be used for different operation such as rough selection, elaborate selection and scavenging for large, medium and small-sized factories and applies to the sorting of nonferrous metal, ferrous metal, rare and precious metal, gold and nonmetallic ores of fine grains.Such machines are divided into ore sand tables and ore slime ones.Ore sand ones apply to the sorting of coarse ores and ore slime ones apply to the sorting of fine ores.Structure and working principle: the working principle of this machine is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning.Then different products can be produced.This machine is composed of three parts, i.E.Head, surface as well as bearing and adjusting gradient.1.Head: this is eccentric connecting-rod type mechanism.The motor drives the eccentric shafts to rotate and the connecting rod to move up and down.When the connecting rod pushes down the toggle plate compression spring, the pull rod drives the surface to move in the direction of head.When the connecting rod pushes it upward, it, through the spring tension, drives the surface to move in the opposite direction.When they are linked, the rotating motion of eccentric shaft is changed into horizontal alternating differential motion.2.Table surface: it is mainly composed of vibrating screen, steel skeleton, glass fiber reinforced plastics and wear-proof surface, feed water tank, feed chute, and draw bar.It adopts steel skeleton frp composite structure.That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glass fiber reinforced plastic surface.The above uses abrasion-proof materials to make surface and riffle (notch groove).3.Bearing and adjusting gradient mechanism the bearing and adjusting gradient mechanism is mainly composed of shaking support plate, adjusting seat board, saddle seat, and adjusting screw rod.The shaking support plate enables the surface to make arc forward and backward alternating movement on vertical plane.The shaking support plate and shaking box are fixed on the adjusting seat board with gripping channel steel.When hand wheel regulating screw rod is used to get the adjusting seat board to rotate on the saddle seat, the transverse gradient of surface can be adjusted.Rock crusher:http://www.Crusher-machine.Com/1.Html hammer crusher:http://www.Hxjq-crusher.Com/66.Html.

Chat Online