logo comp4

Hammer Crushers Finish Task Perfactly

Henan hongxing has been engaged in crusher production for many years.The hammer crusher produced by our company can be used for dry type and wet type crushing.It can fine crushing.The medium hard materials and brittleness materials in the mine, cement, coal metallurgy, building materials, roads, burning and other industries.Hammer crusher can adjust the gap of grate to change the discharging size according to the requirements of users.Relying on advanced technology, our engineer transforms the original hammer crusher, making the equipment have better effect on crushing material.Our hammer crusher adopts the new steel.In the medium and fine crushing work for limestone, slag, coke and coal, the wear of the hammer is reduced and the service life of the hammer crusher is prolonged effectively.The main component of hammer crusher is the rotor with a hammer.The rotor is composed of the main axle, disk, hinge pin and the hammer.In the working process of hammer crusher, the motor drives the rotor at a high speed through the belt, and on the rotor there are series hammers.When the materials get into the working area of hammers, the rotating hammers with high rotation speed crush them, the products which are crushed to meet the required size can be discharged through the outlet and become the final products, and other large size products are brought back to the crushing area by the hammers for re-crushing until they meet the required size.That is the simple working principle of hammer crusher.The main working part of hammer crusher is rotors with hammer.The rotors consist of main shaft, disk, pin shaft and hammers.The motor drives the rotors to rotate quickly in the crushing cavity.Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size.Mobile jaw crusher:http://www.Hx-china.Com/6.Html china mobile crushers:http://www.Hx-crusher.Com/mobile_crushing_station.Html the single stage hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.And hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure.The single stage hammer crusher by the collisions between high speed hammers and materials.The motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers.When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the crushed products meeting the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area by the hammers for being re-crushed until they reached the required size.Not only can the hammer crusher be applied in crushing production line and sand making production line, but it also replaces the cone crusher in beneficiation production line.The single-stage hammer crusher is used to crush limestone, gypsum, coal, marl, sand shale with compressive strength not exceeding 200mpa.Owing to such features as greater crushing ratio, even graininess, simple construction, easy maintenance and economical operation, it is widely used in cement industry.As the professional manufacturer of complete sets of mining machinery, such as china dryer, henan hongxing is always doing the best in products and service.

Chat Online